Accessory Parts For Pinewood Derby Cars - Metal Lead Free Weights

Metal weights are an essential accessory part for pinewood derby cars. The metal weights add critical ounces to a pinewood derby car in a race derby. Take care that you observe the weight standards set by the race committee - most races have a weight limit placed on each pine car. Pinewood derby race cars may weigh no more than the proscribed weight, usually five ounces.
Weigh your pinewood derby car and weights. Due to differences in scales, it may be better to leave the pinewood car a little heavy and adjust it on derby race day. If necessary, remove a portion of the metal weight accessory part following the molded in lines. Use a hacksaw, pliers, or your hands.
The heavier your pinewood derby car, the faster it will go. Pinewood adjustable metal weights allow car weight adjustment, even on race day. Soft as lead weights, these accessory parts are lead free, and are available in a variety of styles. Check local rules for maximum weight (usually 5 ounces) and minium clearance under the car (usually 3/8 inch from pine car bottom to the track).
Axles and metal weights must be flush with the bottom to have 3/8 inch from the bottom of the pine car to the racing surface. The metal weights can be recessed into the bottom of the car.

Wholesale prices for kids groups may be fourd at this link
Pertinent Articles
Building The Pine Car
Racing The Pine Car
Pine Car Tips From Pine Pro Company